CONVERTER CABLE

ABADI CONVERTOR FAMILY

USB Convertor Cable

USB to IDE2.5"/3.5"/SATA-I/II

code: CB-IDE/U/COMBO(2.5"+3.5")	code: CB-IDE/U/SATA

USB Convertor cable:
code:	Description:
CB-USB/LPT	USB to 25 pin LPT Pareller
CB-USB/NET	USB to USB Network
CB-USB/LAP	USB to USB Data Laplink
CB-USB/SER	USB to RS232 Serial(COM)

code: CB-USB/SND/AC3
USB 3D Sound:
Description:
two jacks, one for headset, the other for microphone.
a. USB audio adapter
b. USB 1.1 and 2.0 compliant
c. USB bus-powered capability
d. 3D sound technology virtual 5.1-channel sound field
e. Hot plug-and-play USB interface

code: CB-USB/LAN
USB TO Ethernet 10/100M Adapter
Description:
-USB specification Ver. 1.1 and 2.0 compliant.
-IEEE 802.3 MII compliant.
-Supports USB Suspend/Resume detection logic.
-Full-Speed USB Device.
-Supports automatically load vendor ID from EEPROM.

code: CB-USB/PS2
USB to PS2 Cable
Description:
1) USB to PS2 converter
2) Supports both UHCI and OHCI specifications
3) Converts 2 PS2 (keyboard & mouse) to 1 USB port
4) Supports computer USB to PS/2 port of KVM switch
5) Low power consumption, powered from the system

code: CB-USB/25P
USB to Parallel Cable
Description:
Features: 1) One point connects to the DB36 port of combing printer, and another point connects to the USB port of computer 2) Turn on the printer's power and insert this into the USB port. The Windows system will inform that the computer has found a new hardware 3) Windows 2000/XP system will automatically find and recognize the driver, then inform you that it has found the printer and the automatically setting up will go on immediately 4) To Windows ME, it needs to direct to the catalogue of driver/Windows 98 and set up the driver of printer's combing port. The computer will inform that it has found the printer and will set up the compatible driver immediately

SATA to IDE adapter Kit
	code: CB-IDE/SATA IDE and SATA Converter Specifications & features: 1) Converts serial ATA to parallel ATA (HW-628) 2) Converts parallel ATA to Serial ATA (HW-629) 3) Supports ATA 100/133 4) Compliant with serial ATA specification 5) One 40pin IDE port 6) One serial ATA port 7) One 4pin power connector

code: CB-U/SR/Z20
USB 2.0 to RS232 Serial Converter :
Description:
1) USB2.0 to RS232 serial converter
2) Support over 1Mbps data transfer rate
3) Support remote wake-up and power management
4) Suitable for PDA and Modem
5) Low power consumption, powered from the system


	code:cb-usb/1to4
	USB EXTENTION USB A to Mini 5 pin USB A to Mini 4 pin USB A to USB A USB A to USB B


	code:cb-usb/1to4
	USB EXTENTION USB A to Mini 5 pin USB A to Mini 4 pin USB A to USB A USB A to USB B

Terms of Use | Privacy Policy | Contact Webmaster
Copyright 2004 Komputer Abadi Sdn. Bhd.. All rights reserved.
All other company and product names are trademarks or registered trademarks of their respective owners